Simple exploration of 99365-69-2

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

99365-69-2, 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride is a tetrahydroisoquinoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

99365-69-2, 7-nitro-l,2,3,4-tetrahydroisoquinoline hydrochloride (500 mg, 2.33 mmol) and potassium carbonate (1610 mg, 1 1.65 mmol) in acetonitrile (155 mL) was added 2-iodoethanol (0.22 mL, 2.79 mmol). After heating at reflux overnight, the reaction was concentrated and the crude material partitioned between ethyl acetate and water. The aqueous layer was washed with ethyl acetate (3x) and the organics were combined, dried over magnesium sulfate, filtered, and concentrated. The crude residue was purified by silica gel chromatography (0-15percent methanol in dichloromethane) to give the title compound as a brown oil (159 mg, 0.72 mmol, 31percent yield); MS (ESI) MS (ESI) m/z 223.4 [M+l]+

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; SIGNAL PHARMACEUTICALS, LLC; WO2009/89042; (2009); A1;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem

Some tips on 99365-69-2

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.99365-69-2,7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride,as a common compound, the synthetic route is as follows.

99365-69-2, Into a 20 mL vial was charged 7-nitro-l,2,3,4-tetrahydroisoquinoline, hydrochloric acid salt (0.300 g, 1.398 mmol), methoxyacetyl chloride (0.141 ml, 1.537 mmol), triethylamine (0.429 ml, 3.07 mmol), and dichloromethane (6.99 ml). The reaction was stirred at room temperature for 2 hours. The reaction was diluted with dichloromethane, washed with IN HC1, saturated aqueous sodium bicarbonate, and brine. The organic layer was dried over MgS04, filtered and concentrated to provide the title compound. MS (DCI(+)) m/e 251 (M+H)+.

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ABBOTT LABORATORIES; BA-MAUNG, Nwe Y.; CLARK, Richard F.; ERICKSON, Scott A.; FIDANZE, Steve D.; KAWAI, Megumi; MANTEI, Robert A.; SHEPPARD, George S.; SORENSON, Bryan K.; WANG, Gary T.; WO2011/53476; (2011); A1;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem

Simple exploration of 99365-69-2

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

99365-69-2, 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride is a tetrahydroisoquinoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

99365-69-2, 10percent Pd/C (1.9 g) was added to a solution of 7-nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride (19 g; 1 equiv.) in 300 ml of methanol, and the reaction mixture was hydrogenated for 2 hours at 60 PSI. When the conversion was complete, filtration over Celite was carried out, the filter cake was then washed 4 times with methanol, the filtrate was concentrated under reduced pressure, and the residue was taken up in 100 ml of water. The aqueous solution was adjusted to a pH value of 8-9 with potassium hydroxide solution and extracted 3.x. with chloroform. The combined organic phases were dried over sodium sulfate and reduced under reduced pressure. 1,2,3,4-Tetrahydroisoquinoline-7-amine (9 g; 69.2percent) was obtained in the form of a pale-brown solid.

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Gruenenthal GmbH; US2010/234340; (2010); A1;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem

Simple exploration of 99365-69-2

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

99365-69-2, 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride is a tetrahydroisoquinoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated,99365-69-2

7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride (2) from Example 1, is placed in a Parr shaker bottle (15.0 g, 69.9 mmol) dissolved in 95percent EtOH (100 mL), and to the Parr shaker bottle is added concentrated HCI (10 mL), water (25 mL), and Pt02 (0.5 g). The mixture is hydrogenated at 50 psi until no further drop in pressure was observed (about 4 hours). The yellowish suspension is filtered through Celite and evaporated to dryness to afford a yellowish solid which is made basic with 10percent NaOH solution (adequate care is exercised in catalyst disposal). Extraction of the basic solution with CHC13 (three times), followed by drying over anhydrous Na2S04 and evaporation of the solvent, yields a reddish yellow solid (9.54 g, 92.2 percent) : mp = 110-112. 7-Amino-1,2,3,4-tetrahydroisoquinoline dihydrochloride (3) is recrystallized from aqueous MeOH as buff colored needles, mp = 290 ¡ãC.

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; ENVIVO PHARMACEUTICALS, INC.; WO2005/108367; (2005); A1;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem

Some tips on 99365-69-2

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.99365-69-2,7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride,as a common compound, the synthetic route is as follows.,99365-69-2

1) Production of 2-(2-methoxyethyl)-7-nitro-1,2,3,4-tetrahydroisoquinoline: 720 mg of the entitled compound was obtained as a yellow solid according to the same method as in Production Example 13-1), for which, however, 1 g of the compound obtained in Production Example 22-1) was used in place of 7-nitro-2,3,4,5-tetrahydro-1H-3-benzazepine used in Production Example 13-1) and acetonitrile was used in place of 1,4-dioxane. 1H-NMR (CDCl3) delta: 7.98 (1H, dd, J=8.3, 2.4 Hz), 7.92 (1H, d, J=2.4 Hz), 7.24 (1H, d, J=8.3 Hz), 3.78 (2H, s), 3.61 (2H, t, J=5.9 Hz), 3.40 (3H, s), 3.01 (2H, t, J=5.4 Hz), 2.84 (2H, t, J=5.9 Hz), 2.79 (2H, t, J=5.4 Hz) ESI-MS Found: m/z [M+H] 237

The synthetic route of 99365-69-2 has been constantly updated, and we look forward to future research findings.

Reference£º
Patent; Banyu Pharmaceutical Co., Ltd.; EP2168966; (2010); A1;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem

New learning discoveries about 99365-69-2

99365-69-2 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride 13521670, atetrahydroisoquinoline compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.99365-69-2,7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride,as a common compound, the synthetic route is as follows.,99365-69-2

To a stirred suspension of 7-nitro- 1,2,3, 4-tetrahydroisoquino line hydrochloride (7.00 g, 32.6 mmol) in dichloromethane (150 mL) at ambient temperature was added triethylamine (9.55 mL, 68,5 mmol) To the resulting solution was added di-tert-butyl dicarbonate (7.83 g, 35.9 mmol). The resulting solution was stirred at ambient temperature for 90 minutes, then concentrated. The residue was partitioned between ethyl acetate (100 mL) and IM citric acid (100 mL). The organic layer was washed with brine (50 mL), dried over sodium sulfate and concentrated to afford tert-butyl 7-nitro-3,4-dihydroisoquinoline- 2(lH)-carboxylate as a brown oil (9.43 g, 104percent yield).

99365-69-2 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride 13521670, atetrahydroisoquinoline compound, is more and more widely used in various.

Reference£º
Patent; ARRAY BIOPHARMA INC.; WO2009/158426; (2009); A1;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem

Introduction of a new synthetic route about 99365-69-2

99365-69-2, With the rapid development of chemical substances, we look forward to future research findings about 99365-69-2

7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride, cas is 99365-69-2, it is a common heterocyclic compound, the tetrahydroisoquinoline compound, its synthesis route is as follows.

(4-2-1) To 125 ml of suspension in ethanol of 136 g of 7-nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride was added 98 ml of triethylamine and 83 ml of ethyl acrylate, and the solution was heated and stirred overnight under reflux. The solution was concentrated under reduced pressure, and the residue was extracted with ethyl acetate, washed with water, and dried with anhydrous sodium sulfate. After separating the desiccant by filtration, the filtrate was concentrated under reduced pressure to obtain 2-(2-(ethoxycarbonyl)ethyl)-7-nitro-1,2,3,4-tetrahydroisoquinoline.

99365-69-2, With the rapid development of chemical substances, we look forward to future research findings about 99365-69-2

Reference£º
Patent; Terumo Kabushiki Kaisha; US5789595; (1998); A;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem

Brief introduction of 99365-69-2

As the paragraph descriping shows that 99365-69-2 is playing an increasingly important role.

99365-69-2, 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride is a tetrahydroisoquinoline compound, ?involved in a variety of chemical synthesis. Rlated chemical reaction is continuously updated

1) Production of 2-(7-nitro-3,4-dihydroisoquinolin-2(1H)-yl)ethanol: An acetonitrile solution (30 mL) of 3 g of the compound obtained in Production Example 22-1), 2.3 g of 2-chloroethanol and 3.9 g of potassium carbonate was stirred at 100¡ãC for 15 hours. The reaction liquid was cooled, diluted with chloroform and washed with saturated saline water. The organic layer was washed with saturated saline water, dried with anhydrous magnesium sulfate, and the solvent was evaporated away under reduced pressure. The resulting crude product was purified through basic silica gel column chromatography (hexane/ethyl acetate) and further through silica gel column chromatography (hexane/ethyl acetate) to obtain 1.5 g of the entitled compound as a colorless solid. 1H-NMR (CDCl3) delta: 8.00 (1H, dd, J=8.5, 2.2 Hz), 7.93 (1H, d, J=2.2 Hz), 7.28-7.25 (1H, m), 3.78 (2H, s), 3.74 (2H, t, J=5.5 Hz), 3.00 (2H, t, J=5.9 Hz), 2.86 (2H, t, J=5.9 Hz), 2.76 (2H, t, J=5.5 Hz) ESI-MS Found: m/z [M+H] 223

As the paragraph descriping shows that 99365-69-2 is playing an increasingly important role.

Reference£º
Patent; Banyu Pharmaceutical Co., Ltd.; EP2168966; (2010); A1;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem

New learning discoveries about 99365-69-2

99365-69-2 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride 13521670, atetrahydroisoquinoline compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.99365-69-2,7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride,as a common compound, the synthetic route is as follows.

(a) 2-benzyl-7-nitro-1,2,3,4-tetrahydroisoquinoline monohydrochloride To a solution of 7-nitro-1,2,3,4-tetrahydroisoquinoline monohydrochloride (2.50 g, 11.6 mmol) and potassium carbonate (2.0 g) in acetonitrile (100 ml) was added benzyl bromide (2.22 g, 13.0 mmol) in acetonitrile (10 ml). The solution was stirred overnight and the solid was then removed by filtration. The solvent was removed in vacuo to give a solid which was partitioned between methylene chloride and water. The dried (MgSO4) organic phase was concentrated and the resulting oil was taken up in ethanol (50 ml). This solution was made acidic with hydrochloric acid in ethanol. The precipitate which formed had set up solid and an additional 150 ml of ethanol and 50 ml of ether was added. The solid was collected and air dried to give 2-benzyl-7-nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride as an off white solid (2.78 g (79percent)), m.p. 256¡ã-8¡ã C. (dec).

99365-69-2 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride 13521670, atetrahydroisoquinoline compound, is more and more widely used in various.

Reference£º
Patent; Astra Aktiebolag; US5807886; (1998); A;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem

 

New learning discoveries about 99365-69-2

99365-69-2 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride 13521670, atetrahydroisoquinoline compound, is more and more widely used in various.

With the rapid development and complex challenges of chemical substances, new drug synthesis pathways are usually the most effective.99365-69-2,7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride,as a common compound, the synthetic route is as follows.

7-nitro-l,2,3,4-tetrahydro-isoquinoline hydrochloride (2.57 g) was stirred inCH2Cl2/satd. NaHCO3 for 40 min. After separation of the layers (hydrophobic frit) the solvent was evaporated and the resulting solid dissolved in EtOH (80 ml), PtO2 (112 mg) was added and the mixture was stirred under an atmosphere of hydrogen for 3h. The catalyst was removed by filtration and solvent evaporated to give 7-amino-l,2,3,4-tetrahydro-isoquinoline as a brown solid (1.73 g).

99365-69-2 7-Nitro-1,2,3,4-tetrahydroisoquinoline hydrochloride 13521670, atetrahydroisoquinoline compound, is more and more widely used in various.

Reference£º
Patent; PIRAMED LIMITED; THE INSTITUTE OF CANCER RESEARCH; WO2008/125839; (2008); A2;,
Tetrahydroisoquinoline – Wikipedia
1,2,3,4-Tetrahydroisoquinoline | C9H11N – PubChem